Sciact
  • EN
  • RU

Fracture analysis in the area of contact stresses using the FEM and the gradient criteria of the limiting state Full article

Journal Materials Today: Proceedings
ISSN: 2214-7853
Output data Year: 2019, Number: 16(1), Article number : 130-136, Pages count : 7 DOI: 10.1016/j.matpr.2019.05.243
Tags Circular plate; Contact problem; Finite element method; Nonlocal fracture criteria; Spark plasma sintering; Transverse rupture strength
Authors Fedorova Natalia Vitalievna 1,2 , Legan Mikhail Antonovich 1,2 , Dudina Dina Vladimirovna 1,2,3
Affiliations
1 Lavrentyev Institute of Hydrodynamics SB RAS
2 Novosibirsk State Technical University,
3 Institute of Solid State Chemistry and Mechanochemistry SB RAS

Abstract: This article discusses the technique for determining the maximum tensile stress in the vicinity of the contact region for a brittle material in the deformation by ball on ring test. The specimens of circular plates obtained by spark plasma sintering. Formulation of the contact axisymmetric problem of indenting the steel ball in the circular plate of FeAl freely supported along its contour is considered on the basis of the experimental data. The numerical analysis is carried out using the finite element method in the software package ANSYS 17.2 for the estimation of fracture. The nonlocal gradient failure criterion is used for an analytical evaluation of effective tensile stresses in the vicinity of the contact area.
Cite: Fedorova N.V. , Legan M.A. , Dudina D.V.
Fracture analysis in the area of contact stresses using the FEM and the gradient criteria of the limiting state
Materials Today: Proceedings. 2019. N16(1). 130-136 :1-7. DOI: 10.1016/j.matpr.2019.05.243 Scopus РИНЦ OpenAlex
Identifiers:
Scopus: 2-s2.0-85094589550
Elibrary: 45189054
OpenAlex: W2967924223
Citing: Пока нет цитирований
Altmetrics: