Fracture analysis in the area of contact stresses using the FEM and the gradient criteria of the limiting state

Fracture analysis in the area of contact stresses using the FEM and the gradient criteria of the limiting state Научная публикация

Журнал

Materials Today: Proceedings
ISSN: 2214-7853

Вых. Данные

Год: 2019, Номер: 16(1), Номер статьи : 130-136, Страниц : 7 DOI: 10.1016/j.matpr.2019.05.243

Ключевые слова

Circular plate; Contact problem; Finite element method; Nonlocal fracture criteria; Spark plasma sintering; Transverse rupture strength

Авторы

Федорова Наталья Виталиевна ^1,2 , Леган Михаил Антонович ^1,2 , Дудина Дина Владимировна ^1,2,3

Организации

1	Lavrentyev Institute of Hydrodynamics SB RAS
2	Novosibirsk State Technical University,
3	Institute of Solid State Chemistry and Mechanochemistry SB RAS

This article discusses the technique for determining the maximum tensile stress in the vicinity of the contact region for a brittle material in the deformation by ball on ring test. The specimens of circular plates obtained by spark plasma sintering. Formulation of the contact axisymmetric problem of indenting the steel ball in the circular plate of FeAl freely supported along its contour is considered on the basis of the experimental data. The numerical analysis is carried out using the finite element method in the software package ANSYS 17.2 for the estimation of fracture. The nonlocal gradient failure criterion is used for an analytical evaluation of effective tensile stresses in the vicinity of the contact area.

Fedorova N.V. , Legan M.A. , Dudina D.V.
Fracture analysis in the area of contact stresses using the FEM and the gradient criteria of the limiting state
Materials Today: Proceedings. 2019. N16(1). 130-136 :1-7. DOI: 10.1016/j.matpr.2019.05.243 Scopus РИНЦ OpenAlex

Scopus:	2-s2.0-85094589550
РИНЦ:	45189054
OpenAlex:	W2967924223

Пока нет цитирований