Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Al–Fe66Cr10Nb5B19 Metallic Glass Powder Mixtures

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Al–Fe66Cr10Nb5B19 Metallic Glass Powder Mixtures Научная публикация

Журнал

Metals
ISSN: 2075-4701

Вых. Данные

Год: 2021, Том: 11, Номер: 9, Номер статьи : 1457, Страниц : 12 DOI: 10.3390/met11091457

Ключевые слова

Interfacial reaction; Mechanical properties; Metal matrix composite; Metallic glass; Reinforcement

Авторы

Dudina Dina V. ^1,2,3 , Bokhonov Boris B. ³ , Batraev Igor S. ¹ , Kvashnin Vyacheslav I. ^1,2 , Legan Mikhail A. ^1,2 , Novoselov Aleksey N. ¹ , Anisimov Alexander G. ¹ , Esikov Maksim A. ^1,2 , Ukhina Arina V. ³ , Matvienko Alexander A. ³ , Georgarakis Konstantinos ⁴ , Koga Guilherme Yuuki ⁵ , Moreira Jorge Alberto ^5,6,7

Организации

1	Lavrentyev Institute of Hydrodynamics SB RAS,
2	Novosibirsk State Technical University
3	Institute of Solid State Chemistry and Mechanochemistry SB RAS
4	School of Aerospace, Transport and Manufacturing, Cranfield University
5	Department of Materials Science and Engineering, Federal University of São Carlos
6	The Laboratory of Electrochemistry and Physical-Chemistry of Materials and Interfaces (LEPMI), Université Grenoble Alpes, Université Savoie Mont Blanc, CNRS
7	Science et Ingénierie des Matériaux et Procédés (SIMaP), Université Grenoble Alpes, CNRS, Grenoble

Информация о финансировании (1)

Министерство науки и высшего образования Российской Федерации

FWGG-2021-0005

At present, metallic glasses are evaluated as alternative reinforcements for aluminum matrix composites. These composites are produced by powder metallurgy via consolidation of metallic glass-aluminum powder mixtures. In most studies, the goal has been to preserve the glassy state of the reinforcement during consolidation. However, it is also of interest to track the structure evolution of these composites when partial interaction between the matrix and the metallic glass is allowed during sintering of the mixtures. The present work was aimed to study the microstructure and mechanical properties of composites obtained by spark plasma sintering (SPS) of Al-20 vol.% Fe66Cr10Nb5B19 metallic glass mixtures and compare the materials, in which no significant interaction between the matrix and the Fe-based alloy occurred, with those featuring reaction product layers of different thicknesses. Composite materials were consolidated by SPS at 540 and 570◦C. The microstructure and mechanical properties of composites obtained by SPS and SPS followed by forging, composites with layers of interfacial reaction products of different thicknesses, and metallic glass-free sintered aluminum were comparatively analyzed to conclude on the influence of the microstructural features of the composites on their strength.

Dudina D.V. , Bokhonov B.B. , Batraev I.S. , Kvashnin V.I. , Legan M.A. , Novoselov A.N. , Anisimov A.G. , Esikov M.A. , Ukhina A.V. , Matvienko A.A. , Georgarakis K. , Koga G.Y. , Moreira Jorge A.
Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Al–Fe66Cr10Nb5B19 Metallic Glass Powder Mixtures
Metals. 2021. V.11. N9. 1457 :1-12. DOI: 10.3390/met11091457 WOS Scopus РИНЦ OpenAlex

Web of science:	WOS:000701450500001
Scopus:	2-s2.0-85114937433
РИНЦ:	47076317
OpenAlex:	W3201378764

БД	Цитирований
Scopus	9
OpenAlex	10
РИНЦ	14
Web of science	9