Aluminum Matrix Composites Reinforced with Cu9Al4 Particles: Mechanochemical Synthesis and Consolidation by the Spark Plasma Sintering

Aluminum Matrix Composites Reinforced with Cu9Al4 Particles: Mechanochemical Synthesis and Consolidation by the Spark Plasma Sintering Научная публикация

Журнал

Physics of Metals and Metallography
ISSN: 0031-918X

Вых. Данные

Год: 2021, Том: 122, Номер: 8, Страницы: 768-774 Страниц : 7 DOI: 10.1134/s0031918x2108007x

Ключевые слова

aluminum; Cu9Al4 intermetallic compound; hardness of the composite material; mechanochemical synthesis; scanning electron microscopy; spark plasma sintering; X-ray analysis

Авторы

Grigoreva T.F. ¹ , Dudina D.V. ^1,2,3 , Petrova S.A. ⁴ , Kovaleva S.A. ⁵ , Batraev I.S. ² , Vosmerikov S.V. ¹ , Devyatkina E.T. ¹ , Lyakhov N.Z. ^1,6

Организации

1	Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch, Russian Academy of Sciences
2	Lavrentyev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences
3	Novosibirsk State Technical University
4	d Institute of Metallurgy, Ural Branch, Russian Academy of Sciences, Ekaterinburg
5	Joint Institute of Mechanical Engineering, National Academy of Sciences of Belarus
6	Novosibirsk State University

Информация о финансировании (1)

Министерство науки и высшего образования Российской Федерации

FWGG-2021-0005

X-ray analysis and scanning electron microscopy have been used to study mechanochemically synthesized Al/10 wt % Cu9Al4 and Al/20 wt % Cu9Al4 composites and sintered materials based on them. As a modifiers, powders of the mechanosynthesized nanostructured Cu9Al4 intermetallic compound were used. It has been shown that the composite structure with the uniform distribution of the Cu9Al4 particles in the aluminum matrix is formed during mechanical activation even for 1 min. In the course of mechanical activation of the powder mixtures of Al with 10 and 20 wt % Cu9Al4 the size of intermetallic crystallites grows by 2.3–3 times to 7 and 9 nm, respectively. After spark plasma sintering of the Al/Сu9Al4 composites, the uniform distribution of reinforcing particles retains for their content up to 20 wt %. The hardness of sintered composites is 60–77 HV, which is ~2 times higher than the hardness of aluminum without additives of the strengthening phase.

Grigoreva T.F. , Dudina D.V. , Petrova S.A. , Kovaleva S.A. , Batraev I.S. , Vosmerikov S.V. , Devyatkina E.T. , Lyakhov N.Z.
Aluminum Matrix Composites Reinforced with Cu9Al4 Particles: Mechanochemical Synthesis and Consolidation by the Spark Plasma Sintering
Physics of Metals and Metallography. 2021. V.122. N8. P.768-774. DOI: 10.1134/s0031918x2108007x WOS Scopus РИНЦ OpenAlex

Григорьева Т.Ф. , Дудина Д.В. , Петрова С.А. , Ковалева С.А. , Батраев И.С. , Восмериков С.В. , Девяткина Е.Т. , Ляхов Н.З.
КОМПОЗИТЫ С АЛЮМИНИЕВОЙ МАТРИЦЕЙ, УПРОЧНЕННЫЕ ЧАСТИЦАМИ Cu9Al4: МЕХАНОХИМИЧЕСКИЙ СИНТЕЗ И КОНСОЛИДАЦИЯ МЕТОДОМ ЭЛЕКТРОИСКРОВОГО СПЕКАНИЯ
Физика металлов и металловедение. 2021. Т.122. №8. С.824-830. DOI: 10.31857/S0015323021080076 РИНЦ OpenAlex

Поступила в редакцию:	17 февр. 2021 г.
Принята к публикации:	12 апр. 2021 г.
Опубликована в печати:	21 сент. 2021 г.

Web of science:	WOS:000697663800007
Scopus:	2-s2.0-85115230744
РИНЦ:	47103936
OpenAlex:	W3199078472

БД	Цитирований
Scopus	2
OpenAlex	3
РИНЦ	2
Web of science	2