Mechanochemical Synthesis of Cu–Al Alloyed Powders and Their Consolidation by Spark Plasma Sintering

Mechanochemical Synthesis of Cu–Al Alloyed Powders and Their Consolidation by Spark Plasma Sintering Научная публикация

Журнал

Physics of Metals and Metallography
ISSN: 0031-918X

Вых. Данные

Год: 2021, Том: 122, Номер: 7, Страницы: 681-687 Страниц : 7 DOI: 10.1134/s0031918x21070024

Ключевые слова

Cu9Al4 intermetallics; mechanochemical synthesis; scanning electron microscopy; solid solution of aluminum in copper; spark plasma sintering; X-ray diffraction analysis

Авторы

Grigoreva T.F. ¹ , Petrova S.A. ² , Kovaleva S.A. ³ , Dudina D.V. ^1,4,5 , Batraev I.S. ⁴ , Kiseleva T.Yu. ⁶ , Zholudev S.I. ⁷ , Vosmerikov S.V. ¹ , Devyatkina E.T. ¹ , Udalova T.A. ^1,5 , Polyakov S.N. ⁷ , Lyakhov N.Z. ^1,8

Организации

1	Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of Russian Academy of Sciences
2	Institute of Metallurgy, Ural Branch of Russian Academy of Sciences, Ekaterinburg
3	Joint Institute of Mechanical Engineering, National Academy of Sciences of Belarus, Minsk
4	Lavrentyev Institute of Hydrodynamics, Novosibirsk
5	Novosibirsk State Technical University
6	Lomonosov Moscow State University, Physics Department
7	Technological Institute for Superhard and Novel Carbon Materials, Troitsk
8	Novosibirsk State University

Информация о финансировании (1)

Министерство науки и высшего образования Российской Федерации

FWGG-2021-0005

The mechanochemically synthesized Cu–20 wt % Al alloys are studied by the X-ray diffraction analysis and scanning electron microscopy. It is shown that, after 20 min of mechanical activation, the single-phase intermetallic compound Cu9Al4 with crystallites ~3 nm in size, low microstrains (~0.03%), and particle size in the range from 0.2–0.4 to 2–4 μm is formed. The morphological characteristics of the solid solution of aluminum in copper, which has been mechanochemically synthesized from the Cu–10 wt % Al alloy, are studied. It is demonstrated that the solid solution is composed of platelike particles 10–50 μm in planar size and 2–10 μm in thickness. The scanning electron and optical microscopy data show that the Cu(Al) solid solution produced by the spark plasma sintering at 700°С are characterized by the low residual porosity (<0.5%). The Vickers hardness is 290 ± 30 HV.

Grigoreva T.F. , Petrova S.A. , Kovaleva S.A. , Dudina D.V. , Batraev I.S. , Kiseleva T.Y. , Zholudev S.I. , Vosmerikov S.V. , Devyatkina E.T. , Udalova T.A. , Polyakov S.N. , Lyakhov N.Z.
Mechanochemical Synthesis of Cu–Al Alloyed Powders and Their Consolidation by Spark Plasma Sintering
Physics of Metals and Metallography. 2021. V.122. N7. P.681-687. DOI: 10.1134/s0031918x21070024 WOS Scopus РИНЦ OpenAlex

Григорьева Т.Ф. , Петрова С.А. , Ковалева С.А. , Дудина Д.В. , Батраев И.С. , Киселева Т.Ю. , Жолудев С.И. , Восьмериков С.В. , Девяткина Е.Т. , Удалова Т.А. , Поляков С.Н. , Ляхов Н.З.
МЕХАНОХИМИЧЕСКИЙ СИНТЕЗ ПОРОШКОВ СПЛАВОВ СИСТЕМЫ CU–AL И ИХ КОНСОЛИДАЦИЯ МЕТОДОМ ЭЛЕКТРОИСКРОВОГО СПЕКАНИЯ
Физика металлов и металловедение. 2021. Т.122. №7. С.729-736. DOI: 10.31857/S0015323021070020 РИНЦ OpenAlex

Web of science:	WOS:000692405600008
Scopus:	2-s2.0-85114026984
РИНЦ:	47092728
OpenAlex:	W3198141712

БД	Цитирований
Scopus	8
OpenAlex	10
РИНЦ	7
Web of science	8