Deposition of titanium based coatings by reactive detonation spraying | Sciact

Deposition of titanium based coatings by reactive detonation spraying Научная публикация

Журнал

Koroze a Ochrana Materialu
ISSN: 0452-599X

Вых. Данные

Год: 2018, Том: 62, Номер: 1, Страницы: 6-13 Страниц : 8 DOI: 10.2478/kom-2018-0002

Авторы

Panin S. ^1,3 , Vlasov I. ^1,3 , Dudina D. ² , Ulyanitsky V. ² , Stankevich R. ³ , Batraev I. ² , Maruschak P. ⁴ , Landová M. ⁵

Организации

1	Institute of Strength Physics and Materials Science SB RAS
2	Lavrentiev Institute of Hydrodynamics SB RAS
3	National Research Tomsk Polytechnic University
4	Ternopil Ivan Pul’uj National Technical University
5	Technical University of Košice, Department of Technology and Materials

The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the carrier gas, the spraying distance, the O2/C2H2 ratio, and the volume of the explosive mixture. The phase composition of the coatings and the influence of the spraying parameters on the mechanical properties of the coatings were investigated. In addition, nanohardness of the individual phases contained the coatings was evaluated. It was found that the composition of the strengthening phases in the coatings depends on the O2/C2H2 ratio and the nature of the carrier gas. Detonation spraying conditions ensuring the formation of composite coatings with a set of improved mechanical properties are discussed.

Panin S. , Vlasov I. , Dudina D. , Ulyanitsky V. , Stankevich R. , Batraev I. , Maruschak P. , Landová M.
Deposition of titanium based coatings by reactive detonation spraying
Koroze a Ochrana Materialu. 2018. V.62. N1. P.6-13. DOI: 10.2478/kom-2018-0002 Scopus РИНЦ OpenAlex

Scopus:	2-s2.0-85042588427
РИНЦ:	35506157
OpenAlex:	W2797427588

БД	Цитирований
Scopus	4
OpenAlex	4
РИНЦ	4