Effect of the aluminum alloy composition (Al-Cu-Li or Al-Mg-Li) on structure and mechanical properties of dissimilar laser welds with the Ti-Al-V alloy Научная публикация
| Журнал |
Optics and Laser Technology
ISSN: 0030-3992 |
||||
|---|---|---|---|---|---|
| Вых. Данные | Год: 2020, Том: 126, Страницы: 106135 Страниц : 1 DOI: 10.1016/j.optlastec.2020.106135 | ||||
| Ключевые слова | Dissimilar joints; Intermetallic compounds; Laser beam offset; Laser welding; Microstructure; Strength | ||||
| Авторы |
|
||||
| Организации |
|
Реферат:
This paper presents the results of the studies of dissimilar Ti-Al-V/Al-Cu-Li and Ti-Al-V/Al-Mg-Li laser welds. The main variable parameter was the laser offset towards the titanium alloy. It was found that strength properties of the welds were significantly affected by alloying elements (copper or magnesium) in the aluminum alloys. The presence of copper improved kinetics and thermodynamics of the welding process due to the formation of specific phases in the fusion zone. Also, it increased the strength of the dissimilar welds by 2.5 times compared with the Ti-Al-V/Al-Mg-Li joints.
Библиографическая ссылка:
Malikov A.
, Vitoshkin I.
, Orishich A.
, Filippov A.
, Karpov E.
Effect of the aluminum alloy composition (Al-Cu-Li or Al-Mg-Li) on structure and mechanical properties of dissimilar laser welds with the Ti-Al-V alloy
Optics and Laser Technology. 2020. V.126. P.106135. DOI: 10.1016/j.optlastec.2020.106135 WOS Scopus РИНЦ OpenAlex
Effect of the aluminum alloy composition (Al-Cu-Li or Al-Mg-Li) on structure and mechanical properties of dissimilar laser welds with the Ti-Al-V alloy
Optics and Laser Technology. 2020. V.126. P.106135. DOI: 10.1016/j.optlastec.2020.106135 WOS Scopus РИНЦ OpenAlex
Идентификаторы БД:
| Web of science: | WOS:000523646300020 |
| Scopus: | 2-s2.0-85079183660 |
| РИНЦ: | 43238153 |
| OpenAlex: | W3005967456 |