Wear Resistance of Tool Steels during Dry Sliding Friction Full article
Journal |
Journal of Friction and Wear
ISSN: 1068-3666 |
||||||
---|---|---|---|---|---|---|---|
Output data | Year: 2025, Volume: 46, Number: 2, Pages: 92-100 Pages count : 9 DOI: 10.3103/S1068366625700369 | ||||||
Tags | tool steels, wear resistance, dry sliding friction | ||||||
Authors |
|
||||||
Affiliations |
|
Abstract:
Tribological studies of 5KhNM, 11Kh4V2MF3S2, and 95Kh6M3F3ST steels have been performed under dry sliding friction conditions in pairs of a steel disk–TT10K8B hard alloy pin at a pressure of 40 MPa. The test scheme has been based on the reciprocating movement of a steel sample relative to a carbide counterbody at a speed of 0.1 m/s. The test time for each sample was 10 h. The value of linear wear of friction pair elements has been used as a resistance criterion in the process of sliding friction. Minimal wear under dry sliding friction conditions in a pair with a TT10K8B hard alloy indenter has been recorded when testing samples of 11Kh4V2MF3S2 high-carbon tool steel after hardening from 1060°C and three-fold tempering at 525°C. The value of the total linear wear in the friction pair 11Kh4V2MF3S2 steel–TT10K8B hard alloy is four times less compared to that of the pair 5KhNM steel–TT10K8B hard alloy.
Cite:
Kotov D.I.
, Bataev A.A.
, Bataev I.A.
, Zubashevskij K.M.
, Emurlaev K.I.
, Shikalov V.S.
Wear Resistance of Tool Steels during Dry Sliding Friction
Journal of Friction and Wear. 2025. V.46. N2. P.92-100. DOI: 10.3103/S1068366625700369
Wear Resistance of Tool Steels during Dry Sliding Friction
Journal of Friction and Wear. 2025. V.46. N2. P.92-100. DOI: 10.3103/S1068366625700369
Original:
Котов Д.И.
, Батаев А.А.
, Батаев И.А.
, Зубашевский К.М.
, Эмурлаев К.И.
, Шикалов В.С.
Износостойкость инструментальных сталей в условиях сухого трения скольжения
Трение и износ. 2025. Т.46. №2. С.136-147. DOI: 10.32864/0202-4977-2025-46-2-136-147 OpenAlex
Износостойкость инструментальных сталей в условиях сухого трения скольжения
Трение и износ. 2025. Т.46. №2. С.136-147. DOI: 10.32864/0202-4977-2025-46-2-136-147 OpenAlex
Dates:
Submitted: | Aug 19, 2024 |
Accepted: | Apr 21, 2025 |
Published print: | Oct 7, 2025 |
Identifiers:
No identifiers
Citing:
Пока нет цитирований