Sciact
  • EN
  • RU

Annular Rod Torsion under Orthotropic Creep Научная публикация

Журнал Journal of Applied Mechanics and Technical Physics
ISSN: 0021-8944
Вых. Данные Год: 2025, Том: 66, Номер: 1, Страницы: 149-161 Страниц : 13 DOI: 10.1134/S002189442501002X
Ключевые слова structural alloy, orthotropy, creep, torsion, annular rod, minimum additional dissipation and total power, characteristic point
Авторы Banshchikova I.A. 1
Организации
1 Lavrentyev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia

Реферат: Solutions to a problem of a solid circular rod made of orthotropic creep material and subjected to torsion by a constant torque are generalized to the case of an annular rod. Calculations are carried out using the Bhatnagar–Gupta method, the method based on the principle of minimum additional dissipation, and the finite element method. It is shown that the characteristic parameter method can be used to estimate a stress-strain state. The resulting analytical dependences of the twist angle rate on time at the steady-state stage of creep can be used to determine the shear parameters of the orthotropic Hill potential in torsion experiments or to refine them if these parameters were obtained via other approaches.
Библиографическая ссылка: Banshchikova I.A.
Annular Rod Torsion under Orthotropic Creep
Journal of Applied Mechanics and Technical Physics. 2025. V.66. N1. P.149-161. DOI: 10.1134/S002189442501002X WOS Scopus РИНЦ
Оригинальная: Банщикова И.А.
Кручение стержня кольцевого сечения в условиях ортотропной ползучести
Прикладная механика и техническая физика. 2025. Т.66. №1. С.174-188. DOI: 10.15372/PMTF202415522 РИНЦ
Даты:
Поступила в редакцию: 27 мая 2024 г.
Принята к публикации: 24 июн. 2024 г.
Опубликована в печати: 24 сент. 2025 г.
Идентификаторы БД:
Web of science: WOS:001580410700015
Scopus: 2-s2.0-105017004492
РИНЦ: 82908258
Цитирование в БД: Пока нет цитирований
Альметрики: