Sciact
  • EN
  • RU

OBTAINING COMPOSITE MATERIALS OF THE SYSTEM AL – METALLIC GLASS FE66CR10NB5B19, POSSESSING ANISOTROPY OF MECHANICAL PROPERTIES Full article

Journal Combustion, Explosion and Shock Waves
ISSN: 0010-5082
Output data Year: 2024, Volume: 60, Number: 4, Pages: 551–559 Pages count : 9 DOI: 10.1134/S0010508224040178
Tags COMPOSITE MATERIALS, ALUMINUM, INTERMETALLIC COMPOUNDS, METALLIC GLASS, SPARK SINTERING, MECHANICAL ACTIVATION
Authors Kvashnin Vyacheslav Igorevich 1,2 , Novoselov Aleksei Nikolaevich 1 , Legan Mikhail Antonovich 1,2 , Esikov Maksim Aleksandrovich 1,2 , Gavrilov Aleksandr Ivanovich 3 , Ukhina Arina Viktorovna 3
Affiliations
1 Lavrentyev Institute of Hydrodynamics
2 Novosibirsk State Technical University
3 Institute of Solid State Chemistry and Mechanochemistry of SB RAS

Abstract: The paper describes the production of aluminum matrix composite materials containing metallic glass particles of the composition Fe66Cr10Nb5B19 by successively applying mechanical activation of the initial powders in a planetary mill and spark sintering. During sintering at 540 °C, the metallic glass particles are completely or partially converted into the intermetallic compound Fe4Al13. Composite materials sintered from a mixture of Al + 20 (vol.) % Fe66Cr10Nb5B19 are characterized by anisotropy of mechanical properties: the yield strength in compression, microhardness and deformation at failure in the pressing direction during sintering are 550 MPa, 200 HV and 14.2%, respectively, while in the direction perpendicular to the pressing direction, these characteristics are 740 MPa, 250 HV and 2.2%
Cite: Kvashnin V.I. , Novoselov A.N. , Legan M.A. , Esikov M.A. , Gavrilov A.I. , Ukhina A.V.
OBTAINING COMPOSITE MATERIALS OF THE SYSTEM AL – METALLIC GLASS FE66CR10NB5B19, POSSESSING ANISOTROPY OF MECHANICAL PROPERTIES
Combustion, Explosion and Shock Waves. 2024. V.60. N4. P.551–559. DOI: 10.1134/S0010508224040178 WOS Scopus OpenAlex
Original: Квашнин В.И. , Новоселов А.Н. , Леган М.А. , Есиков М.А. , Гаврилов А.И. , Ухина А.В.
ПОЛУЧЕНИЕ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ СИСТЕМЫ AL - МЕТАЛЛИЧЕСКОЕ СТЕКЛО FE66CR10NB5B19, ОБЛАДАЮЩИХ АНИЗОТРОПИЕЙ МЕХАНИЧЕСКИХ СВОЙСТВ
Физика горения и взрыва. 2024. Т.60. №4. С.141-150. DOI: 10.15372/FGV2023.9318 РИНЦ OpenAlex
Dates:
Submitted: Mar 7, 2023
Accepted: May 24, 2023
Published print: Feb 4, 2025
Identifiers:
Web of science: WOS:001414630600017
Scopus: 2-s2.0-85218161193
OpenAlex: W4407135028
Citing: Пока нет цитирований
Altmetrics: