Sciact
  • EN
  • RU

Effect of Pressure and Heating Temperature on the Structure and Mechanical Properties of Explosion-Welded Aluminum-Niobium Multilayer Composite Научная публикация

Журнал Metal Science and Heat Treatment
ISSN: 0026-0673
Вых. Данные Год: 2024, Номер: 65, Страницы: 568-575 Страниц : 8 DOI: 10.1007/s11041-024-00971-0
Ключевые слова aluminum, niobium, explosion welding, annealing, pressure, microstructure, mechanical properties
Авторы Malyutina Yu.N. 1,2 , Lasurenko D.V. 1 , Lozhkina E.A. 1
Организации
1 Novosibirsk State Technical University
2 Lavrent’ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences

Информация о финансировании (1)

1 Министерство науки и высшего образования Российской Федерации FWGG-2021-0004

Реферат: Multilayer composites formed by explosion welding from alternated plates of niobium and aluminum are studied. The samples are subjected to annealing at 700, 800 and 900°C under a load and without load. The structure, the ultimate tensile strength, the impact toughness and the Vickers microhardness of the composites are determined. It is shown that mixed zones represented by nonequilibrium phases, intermetallic particles of NbAl3 and Nb2 Al, and undissolved niobium volumes are formed near “local melting/rapid solidification” interfaces. Increase of the annealing temperature from 700 to 900°C causes growth of the intermetallic inclusions, appearance of cracks in the reaction layer, and considerable worsening of the mechanical properties. The highest ultimate strength (700 MPa) and impact toughness (86 J/cm2 ) are obtained in the samples annealed under pressure at 900 and 800°C, respectively. Annealing at 700°C at a pressure of 30 MPa is shown to be an optimum treatment producing a favorable effect on the strength characteristics and providing a defect-free structure.
Библиографическая ссылка: Malyutina Y.N. , Lasurenko D.V. , Lozhkina E.A.
Effect of Pressure and Heating Temperature on the Structure and Mechanical Properties of Explosion-Welded Aluminum-Niobium Multilayer Composite
Metal Science and Heat Treatment. 2024. N65. P.568-575. DOI: 10.1007/s11041-024-00971-0 WOS Scopus РИНЦ OpenAlex
Оригинальная: Малютина Ю.Н. , Лазуренко Д.В. , Ложкина Е.А.
ВЛИЯНИЕ ДАВЛЕНИЯ И ТЕМПЕРАТУРЫ НАГРЕВА НА СТРУКТУРУ И МЕХАНИЧЕСКИЕ СВОЙСТВА СВАРЕННОГО ВЗРЫВОМ АЛЮМИНИЙ-НИОБИЕВОГО МНОГОСЛОЙНОГО КОМПОЗИТА
Металловедение и термическая обработка металлов. 2023. №9 (819). С.45-53. DOI: 10.30906/mitom.2023.9.45-53 РИНЦ OpenAlex
Даты:
Принята к публикации: 25 апр. 2023 г.
Опубликована в печати: 20 февр. 2024 г.
Идентификаторы БД:
Web of science: WOS:001170141400003
Scopus: 2-s2.0-85185900414
РИНЦ: 66145590
OpenAlex: W4391966509
Цитирование в БД: Пока нет цитирований
Альметрики: