Реферат: A large number of aircraft parts made of sheet materials are used as flanges, common to such parts is the presence of walls, sides, and various elements that increase rigidity and reduce mass. These sheet parts are complex, mostly closed forms, which by plastic deformation methods require a rather complex stamping tools. Technological methods of manufacturing have certain disadvantages associated with the need to refine the shaping. In addition, the frequent updating of product designs and their constant improvement with a significant amount of experimental and small-scale production required the creation of technological methods that provide a significant reduction in terms of preparation. When punching sheet metal parts, in particular, by the pressure of magnetic-pulse field, the accuracy of shaping is mainly influenced by the shape of the flange in the process of deformation. At the final stage of shaping, an impact contact occurs between the flange of the part with the die or form-block. On impact, elastic unloading of the flange occurs due to the removal of inertial tensile stresses along the generatrix. After the impact contact, dynamic springing or rebound of the flange occurs.

Библиографическая ссылка: Ahmed Soliman M.E. , Kurlaev N.V.
Impact of the electromagnetic field pressure on the bending of high convex-side
IOP Conference Series: Materials Science and Engineering. 2021. V.2094. N042042. P.1-7.

Идентификаторы БД: Нет идентификаторов

Цитирование в БД: Пока нет цитирований