Реферат: The formation of a mixed-type (fracture modes I and II) internal crack in a pipe wall that is made of an ideal elastoplastic material under the action of combined tensile (compression) and bending loads is described. The fracture of such materials is illustrated using a modified Leonov– Panasyuk–Dugdale model, which additionally uses the parameter of fracture process zone diameter. Another case under consideration is complex loading during which the crack path becomes curved, so its bend angle is determined using a force integral criterion based on the stress field asymptotics in the vicinity of the crack tip. Critical fracture parameters are obtained using a two-parameter (dual) strength criterion in the case of a complex stress state. The parameters included in the resulting analytical model are analyzed. The dimensionless geometric parameters of the structure are obtained numerically using the finite element method. Quasibrittle fracture diagrams are constructed.

Библиографическая ссылка: Kurguzov V.D.
Simulation of Delamination of Steel Pipes under Complex loading
Journal of Applied Mechanics and Technical Physics. 2023. V.64. N6. P.1078-1089. DOI: 10.1134/S0021894423060184 WOS Scopus РИНЦ OpenAlex

Оригинальная: Кургузов В.Д.
Моделирование расслоения стальных труб при сложном нагружении
Прикладная механика и техническая физика. 2023. Т.64. №6. С.155-167. DOI: 10.15372/PMTF202315317 РИНЦ

Даты:

Поступила в редакцию:	30 мая 2023 г.
Принята к публикации:	4 авг. 2023 г.

Идентификаторы БД:

Web of science:	WOS:001161198400015
Scopus:	2-s2.0-85185126487
РИНЦ:	64654092
OpenAlex:	W4391792350

Цитирование в БД:

БД	Цитирований
РИНЦ	1

Альметрики: