Formation of Composite Material by Magnetic Pulse Welding of Crystalline Titanium and Nickel-Based Amorphous Alloy Full article
| Journal |
Metal Science and Heat Treatment
ISSN: 0026-0673 |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| Output data | Year: 2023, Volume: 65, Number: 5-6, Pages: 309-316 Pages count : 8 DOI: 10.1007/s11041-023-00931-0 | ||||||||
| Tags | magnetic pulse welding, dynamic interaction, diffraction of x-ray synchrotron radiation, metallic glass. | ||||||||
| Authors |
|
||||||||
| Affiliations |
|
Funding (1)
| 1 | Министерство науки и высшего образования Российской Федерации | FWGG-2021-0005 |
Abstract:
Three-layer composite materials composed of VT1-0 alloy plates and an amorphous layer of ST15 alloy between them, which were produced by magnetic pulse welding, have been studied. The structure of the composites was studied by scanning and transmission electron microscopy. The phase composition was determined using x-ray synchrotron radiation and electron diffraction. It is shown that the welding process causes
partial remelting of the amorphous ribbon and its mixing with titanium, and the cooling causes re-amorphization. Titanium interacts with atmospheric gases and forms oxides and nitrides, which are distributed in the remelted zones of the amorphous layer in the form of particles not larger than 35 nm in size. Welding of the amorphous ribbon to the less active nickel does not produce additional phases.
Cite:
Lazurenko D.V.
, Ivannikov A.A.
, Anisimov A.G.
, Popov N.S.
, Dovzhenko G.D.
Formation of Composite Material by Magnetic Pulse Welding of Crystalline Titanium and Nickel-Based Amorphous Alloy
Metal Science and Heat Treatment. 2023. V.65. N5-6. P.309-316. DOI: 10.1007/s11041-023-00931-0 WOS Scopus РИНЦ OpenAlex
Formation of Composite Material by Magnetic Pulse Welding of Crystalline Titanium and Nickel-Based Amorphous Alloy
Metal Science and Heat Treatment. 2023. V.65. N5-6. P.309-316. DOI: 10.1007/s11041-023-00931-0 WOS Scopus РИНЦ OpenAlex
Original:
Лазуренко Д.В.
, Иванников А.А.
, Анисимов А.Г.
, Попов Н.С.
, Довженко Г.Д.
Формирование композиционного материала методом магнитно-импульсной сварки кристаллического титана и аморфного сплава на никелевой основе
Металловедение и термическая обработка металлов. 2023. Т.5. №815. С.47-54. DOI: 10.30906/mitom.2023.5.47-54 РИНЦ OpenAlex
Формирование композиционного материала методом магнитно-импульсной сварки кристаллического титана и аморфного сплава на никелевой основе
Металловедение и термическая обработка металлов. 2023. Т.5. №815. С.47-54. DOI: 10.30906/mitom.2023.5.47-54 РИНЦ OpenAlex
Identifiers:
| Web of science: | WOS:001095231600002 |
| Scopus: | 2-s2.0-85175789351 |
| Elibrary: | 63940061 |
| OpenAlex: | W4388407678 |