On the Choice of Forming Modes and Estimation of Residual Service Life by Kinetic Equations with the Scalar Damage Parameter Научная публикация
| Журнал |
Journal of Applied Mechanics and Technical Physics
ISSN: 0021-8944 |
||
|---|---|---|---|
| Вых. Данные | Год: 2019, Том: 60, Номер: 6, Страницы: 1096-1103 Страниц : 8 DOI: 10.1134/S0021894419060154 | ||
| Ключевые слова | DAMAGE, HARDENING, RATIONAL CREEP MODE, SOFTENING, STRUCTURAL ALLOYS, TENSION | ||
| Авторы |
|
||
| Организации |
|
Реферат:
The kinetic equations of creep are used to compare damage accumulation in rods under tension in two forming modes: at constant stresses and at constant strain rates corresponding to strain rates in steady-state creep for the same stresses. It is found that from the point of view of increasing the residual service life at the production stage, forming to the required strain value with specified kinematics is preferable to forming at constant stresses for materials on whose strain-time diagrams for σ = const, the fracture strain decreases monotonically with increasing stress. Forming at constant stresses is preferable for materials on whose strain-time diagrams for σ = const, the fracture strain increases monotonically with increasing stress. Calculation results for several alloys are presented.
Библиографическая ссылка:
Banshchikova I.A.
On the Choice of Forming Modes and Estimation of Residual Service Life by Kinetic Equations with the Scalar Damage Parameter
Journal of Applied Mechanics and Technical Physics. 2019. V.60. N6. P.1096-1103. DOI: 10.1134/S0021894419060154 WOS Scopus РИНЦ OpenAlex
On the Choice of Forming Modes and Estimation of Residual Service Life by Kinetic Equations with the Scalar Damage Parameter
Journal of Applied Mechanics and Technical Physics. 2019. V.60. N6. P.1096-1103. DOI: 10.1134/S0021894419060154 WOS Scopus РИНЦ OpenAlex
Оригинальная:
Банщикова И.А.
Выбор режимов формования и оценка эксплуатационного ресурса с использованием кинетических уравнений со скалярным параметром поврежденности
Прикладная механика и техническая физика. 2019. №6. С.139 – 148. DOI: 10.15372/PMTF20190615 РИНЦ OpenAlex
Выбор режимов формования и оценка эксплуатационного ресурса с использованием кинетических уравнений со скалярным параметром поврежденности
Прикладная механика и техническая физика. 2019. №6. С.139 – 148. DOI: 10.15372/PMTF20190615 РИНЦ OpenAlex
Идентификаторы БД:
| Web of science: | WOS:000511997700015 |
| Scopus: | 2-s2.0-85078896756 |
| РИНЦ: | 43243537 |
| OpenAlex: | W3004942749 |